GoFix® MS II
the wood construction screw
Price and ordering function are only visible after successful login.
To the login
product information
SIHGA® tip
For perfect screw pattern, screw head in flush. For screw connections in hardwood WITHOUT drilling, we recommend GoFix® SH.
made in Austria
top European quality and added-value
top European quality and added-value
special thread geometry
optimal traction in the end grain
optimal traction in the end grain
fastens wood to wood, even OSB panels
screw without pre-drilling and pre-sinking
screw without pre-drilling and pre-sinking
fastens pressure-resistant insulation materials for on-rafter insulation
for insulation with a compressive stress above 50 kPa
for insulation with a compressive stress above 50 kPa
screwing permissible from 0° up to 90° to the grain
fastens with all screw-in angles
fastens with all screw-in angles
the splitting effect in the wood is reduced through the special multi-stage head
saves 50 % of storage, combines countersunk head and flat-head; transfers high forces, but can still be countersunk and facilitates screw connections close to the edge
saves 50 % of storage, combines countersunk head and flat-head; transfers high forces, but can still be countersunk and facilitates screw connections close to the edge
special ribs on the shaft and slip coating
pre-drilling effect, easy rotation, battery-saving
pre-drilling effect, easy rotation, battery-saving
SIHGA® tip
fast setting of the screw, user-friendly and time-saving
fast setting of the screw, user-friendly and time-saving
including SIHGAFIX®, Systemstift® and installation instructions
time-saving, practical, precise, all accessories enclosed; SIHGAFIX® also enables screwing into deep grooves
time-saving, practical, precise, all accessories enclosed; SIHGAFIX® also enables screwing into deep grooves
SIHGA® Ornamental Washer MSZ for diameter
8 mm
this Ornamental Washer MSZ increases the tensile force of the head to 9.1 kN; very attractive solution
this Ornamental Washer MSZ increases the tensile force of the head to 9.1 kN; very attractive solution
screwing permissible from 0° up to 90° to the grain
fastens with all screw-in angles
fastens with all screw-in angles
design values
SIHGA® performs the calculation for you
SIHGA® performs the calculation for you
Greatest earthquake protection - GoFix® MS II
- SIHGA® is ahead of its time
tests already under way for the latest revision of Eurocode 5 - latest tests confirm excellent properties
ductility ensures safety - best ductility class S3 for earthquake resistance
safety according to prEN 14592 - simulated earthquake load through cyclic bending
of the bolts
reliable residual load capacity of at least 90 %
GoFix® MS II application by means of impact screwdriver (Tested by the University of Innsbruck)
positive report for processing with impact screwdrivers
positive report for processing with impact screwdrivers
GoFix® MS II using in end grain
GoFix® MS II using in hardwood
- use in hardwood allowed
safety according to ETA -20/0558 - extensive application possible by means of pre-drilling
in solid wood, glued plywood board and laminated veneer wood - head pull-through force and thread extension may be increased by the factor k; observe maximum tensile strength according to ETA
high load capacity for efficient connections